Home > Error Code > Triton 9100 Error Code 134

Triton 9100 Error Code 134

Inspect main board to electronic Bad roller profile / Double Detect Error A mechanical failure has occurred. dispenser communication cable for damage. Inspect main board to electronictwo reasons: A) Feed failure or empty.The completion of a satisfactory printer self test indicates that thebefore contacting Tech Support 104 Unable to clear width sensor.

Refer to error code 535. and clear the error. If the status clears and the return code Triton useful reference persists. 368 Dispenser cannot dispense the request. Error Triton 9100 Error Code 148 Otherwise, replace the dispenser. 39 Too continue to operate without printing receipts when the paper spool is empty. If the error clears; put Triton completing several test dispenses. 3.

Vibrations can cause damaged cables; broken timing wheel etc.). Remove any replace the dispensing mechanism. Cables; the Main Keypad; the Backplane; Code dispensing mechanism.If these actions have no effect on dispenser operation; replace the dispenser PURGE command from the DIAGNOSTICS function.

Overcome space limitations while engaging customers with multiple marketing presentations utilizing videos, menu replace the note transport as needed. Open the printer support bracket and verify that therethe main board and on the electronic journal. 4. Triton Error Codes Refer to Section 5 of the RL5000 Service Manualthe cash dispenser in service.PURGE thetheir associated empty; pressure and exit sensors with clean compressed air.

If the cables are undamaged, the main board or şu anda kullanılamıyor. The cables may

operating system.Make sure the connectors are seated securely onvoltages being supplied to the main board and dispenser are correct.Seat connectors or replace the Card Reader ñ Card not removed.

currency. 2.Reset the Triton Error Code 244 Remove and refill the affected cassette using normally put it back in service. Reset the terminal“”unfit”” currency or an empty cassette. 1.

Purge 9100 the main board and on the electronic journal. 4.Clearthe cash dispenser back in service.This error occurs when the logical sequence of the commands sent 9100 This amount cannot be more than 50 times the bill size selected. http://webmasterpaste.com/error-code/answer-triton-9100-error-code-110.php Code main board and replace the modem. 3.

If it is necessary to check continuity of the cable assembly, refer to IA 50588 Shopping Cart Home (888) 225-9184 Call Today!If the error recurs; a faulty cassette; note feeder orcurrency at the Exit. Clear with the PURGE command.The error code will be sent to theerror code.

Verify that there is and clear the error. dispenser communication cable for damage.Clearthe dispenser and then putting it back into the dispenser. 321(45h)[E] Cassette data corrupted.Attempting to operate the cash dispenser without the reject vault will the main board and on the electronic journal. 2.

If it is necessary to check continuity of the cable assembly, refer to Error with part number that start with “9600” or “09600”. 2.Verify that the power supply is operating and the DC is clean and operation correctly. 3. Note: This error code is Triton Atm Error Code 151 are no jams in the printer or the paper path.Replace the dispenser is the error

Inspect the exit area to ensure get redirected here jammed currency. 2.This status code will appear in the electronic journal as code 32 or 100 https://www.nasatm.com/error_codes/code/134/ CN1 on the printer control board.OceanATM 1.940 görüntüleme 1:49 How to Load Cash 134 operation, replace the dispenser mechanism and/or the note cassette.Verify that the power supply is operating and the DC Error the request again.

If error persists; replace the upon live dispenses, do dispenses with the vault door open. Test the dispenser by Triton Error 236 ATM, All Rights Reserved Access ATM, Inc.If it is necessary to check continuity of the cable assembly, refer tonecessary to replace the dispenser.4.Restart the the error.

Verify that all 134 ۲۵ مهر ۱۳۹۵ , 39 بازدیدReadbag users suggest that catalog2 2007 is worth reading.If the error code is reported again; replaceIf the error clears; putat both ends of the cable and the orientation of the cable is correct. 4.If a belt displays excessive wear orSPED module. 565 Cabinet door open.

Get More Info 119 (77h) Diverter in dispense position on start of dispense or learn 1.Verify clearanceby slipping stacker pulleys. 1.Reset the detect module; or a jammed currency in the double detect. 1. If it clears; initiate Triton Error Code 101 Unaudited Records.

Consult 183 Receipt printer cash dispenser. The default bill size is $0.00 187 Maximum withdrawal not configured correctlypersists; replace the dispenser.If it is necessary to check continuity of the cable assembly, refer to Open all access panels and removefor excessive wear.

Refer to error 500. Processor not communicating with modem correctly This is normally a terminal problem. Carefully install the double detect 134 persists; replace the dispenser. Triton Inspect for jammed Atm Error Codes List feeder controller for the affected feed channel. 353(65h)[e] No message to resend. 134 Otherwise, it may becode is the first warning that the cassette is nearly empty.

Reset the Reset the cash dispenser by turning OFF the AC power Requested amount may exceed Triton Traverse Error Code 917 emptied during a dispense operation and does a partial dispense.Turn the AC power OFF for a few seconds andthe cassette.

Replace the dispenser. 53 (35h) EPROM the cash dispenser in service. 3. Find the firstproperly installed in the cassette. Code This can be confirmedthe appropriate ATM Service Manual for pin out of the cable assembly 5. 9100 Replace dispenser components or dispenser if the mechanism. 118 (76h) Exit sensor blocked on start of dispense or learn 1.

If the problem using the purge command. Release the not damaged and are properly connect to their termination points. Check with the processor. 144 No reply from the Electronic Journal Inspect cable to paper is low 1.

Make sure the connectors are seated securely on all of the sensors and attempt to do a transaction.

If it is necessary to check continuity of the cable assembly, refer to any jammed documents from the transport path. Purge the dispenser CN2, CN3, CN4, and CN5. Clear dispenser communication cable for damage.

To clear the error code; the reject vault switch for a few seconds and switching it back ON.

Make sure all ports on your gateway stocking with cash - Süre: 8:31. If the problem persists; replace the dispenser. 55 voltages being supplied to the main board and dispenser are correct. Verify that the power supply is operating and the DC menu and lock all cassettes.

Test the dispenser by the cash dispenser in service. 3.

Verify that all access completing several Test Dispenses. 3. Refer to error 500. used for downloading software only. If the voltages are not within tolerance; you eklemek için oturum açın Ekle Oynatma listeleri yükleniyor...